1983 SIKORSKY UH-60L BLACK HAWK
Description
This UH-60L Black Hawk is truly a rare opportunity. This is not your typical pre-owned helicopter. This Black Hawk represents a ground-up transformation of a proven, battle-tested platform into a modern, turnkey asset, combining military-grade capability with upgraded avionics, systems, and reliability.
What makes this helicopter unique is the level of investment, modernization, and completeness. It has taken a multi-year process and has been thoughtfully upgraded from nose to tail, creating a platform that is ready to perform immediately across a wide range of missions.Specifications
Year1983
ManufacturerSIKORSKY
ModelUH-60L BLACK HAWK
Serial Number83-23927
Registration #N204TM
ConditionUsed
Total Time6,965.3
Engine 1 Time6,952 SNEW
Engine 1 NotesT700-GE-701D / GE-E-307799C
T700-GE-701D / GE-E-763826C
APU: Honeywell T62T-40-1
SN: 856225
Hours: 5,989
Engine 2 Time3,281 SNEW
ADS-B EquippedYes
Avionics/RadiosVL-60 Electronic Flight Deck System
ACE DECK VL-60
Garmin G5000H upgrade - Including an integrated flight deck with app-based interface features for pilots
Engine Indicating and Crew Alerting System (EICAS) allowing a Synoptic view of the aircraft systems
COTS IFT and RNAV certified Flight Deck
Synthetic Vision
HTAWS
ADS-B in/out
Cargo HookYes
Additional EquipmentAXNES wireless intercom system and three MP30 wireless handsets
Exterior LED lighting System
ELT ME 406HM
Upgraded Straight exhaust pipes
Upgraded Inlet Barrier Filter
Onboard Systems cargo hook with a load weight indicator
BLR Fast Fin Modification (allows an increased useful load of 600lbs and improved stability in hover)
Wires and antennas installed for future installation of a TDFM radio
Wires and control panel installed for HELITAK water tank
Refinished main rotor blade
Main rotor blade DSX coating
Exterior NotesNew custom paint scheme in 2025/26
Interior NotesInterior repainted in 2026
Inspection StatusFresh PMI 1 and 2 and 48 month inspections with new paint, weight reductions, glass cockpit and coated blades
Airframe:
O/B Retention Plate (T/R): 533 hours
Complied with PMI 1, 2 and 48 month inspections
M/R Blade Cuff: 1,560 hours
Main Rotor Spindle Assembly: 2,189 hours
T/R Pitch Change Shaft: 2,229 hours
M/R Blade Cuff: 2,671 hours
Engine 1:
STG 1 FWD Cooling Plate: 1,469 hours
STG 2 AFT Cooling Plate: 1,896 hours
STG 2 FWD Cooling Plate: 2,696 hours
Compressor Impeller: 2,696 hours
STG 3 Turbine Disk: 2,696 hours
Engine 2:
STG 1 FWD Cooling Plate: 1,505 hours
STG 2 AFT Cooling Plate: 1,905 hours
STG 2 FWD Cooling Plate: 2,705 hours
Compressor Impeller: 2,754 hours
STG 3 Turbine Disk: 3,353 hours
Year1983|
ManufacturerSIKORSKY|
ModelUH-60L BLACK HAWK|
Serial Number83-23927|
Registration #N204TM|
ConditionUsed|
Total Time6,965.3|
Engine 1 Time6,952 SNEW |
Engine 1 NotesT700-GE-701D / GE-E-307799C
T700-GE-701D / GE-E-763826C
APU: Honeywell T62T-40-1
SN: 856225
Hours: 5,989|
Engine 2 Time3,281 SNEW |
ADS-B EquippedYes|
Avionics/RadiosVL-60 Electronic Flight Deck System
ACE DECK VL-60
Garmin G5000H upgrade - Including an integrated flight deck with app-based interface features for pilots
Engine Indicating and Crew Alerting System (EICAS) allowing a Synoptic view of the aircraft systems
COTS IFT and RNAV certified Flight Deck
Synthetic Vision
HTAWS
ADS-B in/out|
Cargo HookYes|
Additional EquipmentAXNES wireless intercom system and three MP30 wireless handsets
Exterior LED lighting System
ELT ME 406HM
Upgraded Straight exhaust pipes
Upgraded Inlet Barrier Filter
Onboard Systems cargo hook with a load weight indicator
BLR Fast Fin Modification (allows an increased useful load of 600lbs and improved stability in hover)
Wires and antennas installed for future installation of a TDFM radio
Wires and control panel installed for HELITAK water tank
Refinished main rotor blade
Main rotor blade DSX coating|
Exterior NotesNew custom paint scheme in 2025/26|
Interior NotesInterior repainted in 2026|
Inspection StatusFresh PMI 1 and 2 and 48 month inspections with new paint, weight reductions, glass cockpit and coated blades
Airframe:
O/B Retention Plate (T/R): 533 hours
Complied with PMI 1, 2 and 48 month inspections
M/R Blade Cuff: 1,560 hours
Main Rotor Spindle Assembly: 2,189 hours
T/R Pitch Change Shaft: 2,229 hours
M/R Blade Cuff: 2,671 hours
Engine 1:
STG 1 FWD Cooling Plate: 1,469 hours
STG 2 AFT Cooling Plate: 1,896 hours
STG 2 FWD Cooling Plate: 2,696 hours
Compressor Impeller: 2,696 hours
STG 3 Turbine Disk: 2,696 hours
Engine 2:
STG 1 FWD Cooling Plate: 1,505 hours
STG 2 AFT Cooling Plate: 1,905 hours
STG 2 FWD Cooling Plate: 2,705 hours
Compressor Impeller: 2,754 hours
STG 3 Turbine Disk: 3,353 hours|
