1989 PIPER SUPER CUB

1989

1809014

N4151H

Used

VFR

KSZT

One of the Last 100 Piper PA-18-150 Super Cubs Ever Built! This exceptional Piper PA-18-150 Super Cub is one of the final 100 Super Cubs produced by Piper and is believed to be among the lowest-time examples available on the market today. The current owner acquired the aircraft in 2016 and entrusted CubCrafters with a comprehensive restoration and upgrade. Completed in July 2016 at just 269.8 hours total airframe time, the project was executed to the highest standards, with no expense spared. The result is an outstanding Super Cub that combines the authenticity of a late-production Piper aircraft with the craftsmanship and performance enhancements of one of the world's premier Cub builders. In 2023, the aircraft sustained landing damage and was returned to CubCrafters for professional repair. Once again, no expense was spared to ensure the aircraft was restored to the same exceptional standard established during its 2016 restoration. This is a rare opportunity to own one of the last Piper Super Cubs ever manufactured, featuring remarkably low total time and a meticulous restoration and repair history performed by CubCrafters. For the discerning buyer seeking pedigree, quality, and exclusivity, this aircraft represents an exceptional offering.To top off this exceptional buy, it will be delivered with a fresh annual inspection.

342

Yes

Yes

• Fabricated instrument panel from 2024-T3 Aluminum, 040 in thickness. • "X" brace in the skylight, • inverted dogleg brace, • Cub Crafters' extended baggage supports, • Additional tail reinforcements, • Atlee Dodge weld-on float fittings I.A.W. STC #SA4615NM, • The 3d seat/180-lb baggage I.A.W. Aircraft Innovation's STC SA554AK, • A swinging crossbar I.A.W. Cub Crafters' ST#SA1366CE, • Seat belt attach brackets I.A.W. F. Atlee Dodge's STC #SA02043AK, • The complete fuselage was sandblasted, inspected, and powder coated black. • All new floorboards I.A.W. Cub Crafters' STC #SA00495SE, • All new elevator and rudder cables, new trim system, extended baggage compartment I.A.W. Cub Crafters' #SA00388NY, • Metal headliner I.A.W. Cub Crafters' STC #SA00951SE, • Side access door I.A.W. Cub Crafters' STC#SA00703SE, • All new interior panels that were covered with black fabric which meets or exceeds FAA required burn specs.• New throttle quadrants, • Fit new boot cowl with stainless steel firewall I.A.W. Cub Crafters STC #SA00750SE. • Installed Atlee Dodge under seat front battery installation I.A.W. STC #SA02156AK with new master and starter solenoids and all new battery cables and wires.• New fuel system with "Left, Right, and Both" valve I.A.W. Cub Crafters' STC #SA00415SE,• Installed auto fuel I.A.W. Petersen Aviation, Inc. STC #SA2607CE. • The assembled fuselage was covered in Stits Poly fiber I.A.W. STC #SA1008WE,• New windshield. • New side windows and skylight were installed I.A.W. Cub Crafters STC #SA01126SE,• New brake booster assemblies were installed with all new high pressure brake lines I.A.W. Cub Crafters' STC #SA1245CE,• The 3" extender HD landing gear was installed I.A.W. Cub Crafters' ST#SA00411SE,• Refueling steps I.A.W. Cub Crafters' STC #SA00856SE,• New ABI PMA'd 6:00x6 wheel and brake assemblies were installed with all new brake lines, backing plates and attaching hardware,• Extended safety cables were installed I.A.W. F. Atlee Dodge STC #SA02189AK,• AOSS landing gear suspension installed I.A.W. Burl's Aircraft Rebuild, LLC'S STC #STC #SA02214AK,• 29" Tundra tires were installed I.A.W. Alaskan Bushwheel STC#SA01015SE, • New ABI 3200B Baby Bush tail wheel assembly I.A.W. STC #SA01233SE and a 1-3/4" tail spring,• New front and rear inertia reel shoulder harnesses and new seat belt assemblies. • New Oregon Aero seats and rear under seat storage tray,• New sealed struts with 5/8" strut forks, which complies with AD 2015-08-04 (no further inspections are required), • New aileron and flap cables were installed, • Installed Vortex generators I.A.W. Cub Crafters, Inc. STC #SA00275SE,• All new wing root panels were installed, • Fuel tanks were modified to accept fuel sight gauges and new sight gauges were installed. • Installed new covered stabilizers and elevator using all new attaching hardware; all rigging was accomplished I.A.W. Piper Service Information and Type Certificate,

LYCOMING O-360-C4P

180 HP

72 SNEW

2000

2016

• Installed new Lycoming O-360-C4P 180HP engine (S/N L-42794-36E) with all new baffles, oil cooler, oil cooler hoses, • high flow exhaust system and HD muffler, • Atlee Dodge split muffler shroud I.A.W. STC #SA02024 AK, • All new exhaust clamps and braces, • Aero duct, carb air box, air filter, air filter dome, • B&C alternator I.A.W. STC #SA01343WI, • B&C oil filter I.A.W. STC #SE00825WI, • SkyTec lightweight 149HI starter, • Tanis engine heater, • New Steve's gascolator was installed I.A.W. STC #SA01026SE, • Auto fuel I.A.W. Petersen Aviation, Inc. STC #SE2563CE, • New cowling, • New spinner assembly, • New McCauley 1A200/FA841 propeller (S/N AJB46005).

Yes

Yes

• Mid-Continent, Altimeter, P/N 5934-3A, • U.M.A., Vertical Speed Indicator, P/N8-210-20, • S.I.R.S. Navigation, Compass P/N PG2C, • Rieker Instrument, Inclinometer, P/N1040, • Electronics International, Engine Monitoring System, P/N CC 30P-4, per STC SA02283SE and install manual II 02151301 RevE dated 05-08-2015• Garmin GTX 345 Transponder P/N 011-03302-41, • Garmin GA 35 WAAS GPS antenna P/N 013-00235-00, • ACK Technologies, Altitude Encoder, P/N A-30-9, • Garmin, Com Transceiver, GTR 225, P/N 011-02718-00, • PS Engineering, Stereo Intercom, PM3000, P/N 1193,• Wipaire 2000-Ib gross weight increase was installed I.A.W. STC # SA00997CH. Original Airspeed Indicator remarked to reflect changes due to 2000 Ib. gross weight increase,• Installed NuLite lighting rings to instrumentation as well as Seaton Engineering, • Dual Dimmer Controller, P/N 9100-001-F,• Precise Flight, Pulse Light Control Unit, Model 1210/2405-2A, per STC SA4005NM,• New LED landing light bulbs and AeroLED Pulsar NS strobe lights,• TE Connectivity, Alcoswitch, P/N 2SWK231AL101 keyed start switch.• New push/pull cables. • New aux power plug in panel,• All electrical components were connected with new wiring of the appropriate size and rating for the required current loads. • Circuit protection and switches were relocated from wing root area to instrument panel using new circuit breakers, and switches.• Installed Atlee Dodge under seat front battery installation I.A.W. STC #SA02156AK with new master and starter solenoids and all new battery cables and wires.

2016

2016

2

Will be delivered with a fresh annual inspection.

Yes